Put an end to gasket failure from insufficient load
This company is displaying a new family of gaskets, as well as its Multi-Swell gasket technology, which is said to be the first self-loading general service gasket on the market. The Multi-Swell virtually eliminates gasket failure caused by insufficient load, by creating its own load when in contact with oil or water. These gaskets cut easily and conform to irregular flanges, ensuring tight seals at lower loads. With an extremely high crush strength, the Multi-Swell gaskets allow safe installation in applications where elastomeric gaskets would typically be crushed. Booth 844 — Garlock Sealing Technologies, Palmyra, N.Y.
Versatile belt filter has a range of options for drying
This continuous horizontal belt filter (photo) is suitable for the gentle filtration of sedimenting materials, including abrasive solids from suspensions with little wear. The various filtrates are kept separate, and the filter cake can optionally undergo further treatment in the form of washes, suction drying and pressing at up to 6 bar. In encapsulated or pressure-tight versions, the filter can also be used for toxic or volatile media. There is also a heated version for when thorough drying is required. Slurry feed can be continuous or batchwise. Booth 1103 — BHS-Filtration, Charlotte, N.C.
Steam specialist offers a new line of control valves
This manufacturer of steam traps and other steam handling products is now offering a new line of control valves. The line features a wide range of high-flow, top-opening control valves for easy inspection and tight closure under extreme operating conditions. This line of valves fits into the company’s inventory of energy saving steam and fluid control products and services. Booth 1542 — Pennant International Corp., Edison, N.J.
Maximize heat recovery with a custom exchanger
For engineers in search of cost-effective solutions for energy efficiency, oxidizer systems may be the answer. Thermal or catalytic oxidizer systems are an excellent source of heat recovery, as the high temperatures used to destroy pollutants can be used to satisfy other plant heating needs. This company will showcase a heat exchanger (photo, above) that achieves up to 80% heat recovery with lower pressure drops, smaller equipment footprint and reduced capital cost. The heat exchanger is highly customizable and comes in a variety of sizes, flow patterns and materials of construction. Booth 1544 — Anguil Environmental Systems, Milwaukee, Wis.
Consistent crystallization thanks to careful monitoring
By providing realtime non-invasive monitoring of heat generation and absorption, the ChemFlux reactor system optimizes crystallization processes and controls production to improve consistency. This reactor system measures power, enthalpy and temperature over time, then calculates crystallization data, including point of nucleation, crystal growth rate, reaction end point and effects of variants on product formation and yield. This information allows the user to identify correlations between the cooling rate, the temperature point of nucleation and the quantity of product formed. This data can then be used to control subsequent reactions to ensure batch-to-batch consistency. Booth 1318 — Powder Systems, Liverpool, U.K.
Electric pressure washers keeps plants—and air—clean
These heavy-duty, all-electric hot water pressure washers and steam cleaners heat water using electricity rather than with a conventional gas burner, so they emit no contaminants into the surrounding air. The units are designed for indoor or outdoor use, and explosion-proof models for hazardous environments are available. They require no preheating or recovery time, making hot water available immediately. For optimal cleaning efficiency, the discharge temperature is maintained continuously. Standard ratings for steam cleaners range from 0.6–3.8 gal/min at 100 psi. For hot-water pressure washers, the ratings cover 2.3–5.7 gal/min at 600–3,000 psi. Booth 1145 — Sioux Corp., Beresford, S.D.
A lifecycle care program for heat transfer fluids
For support in heat-transfer-fluid performance, this company provides the Therminol TLC Total Lifecycle Care team to aid customers throughout their systems’ life cycles. The program includes design support, startup assistance, training, sample analysis, flush and refill fluids, and a fluid tradein program. With sample analysis, the company provides testing of in-service heat-transfer fluids to detect any contamination, moisture, or other conditions that can decrease performance. Liquid-phase heat-transfer systems can be cleaned with the Therminol flush fluid, a synthetic hydrocarbon heat-transfer fluid that has a flash point over 95°C and is compatible with most standard mechanical system components found in heat-transfer systems. Booth 1425 — Solutia Inc., St. Louis, Mo.
Pressure filters designed to simplify cake removal
Verti-Press C (VPC) filters are this company’s next generation of automatic pressure filter technology. With a stationary frame and a filter that does not open and close during the filtering process, the number of moving parts is minimized. The VPC filter utilizes a pressurized filter chamber that forces liquid through the filtering media and allows a cake to form. This enclosed pressurized chamber also minimizes potential leaks to maintain plant hygiene and personnel safety. The VPC has horizontal filter chambers that enable cakes to form evenly for maximized removal, while also allowing more than one filter to be stacked on top of one another to minimize footprint. In multiple-chamber situations, chambers operate independently and can be isolated to maximize run times. For wastewater applications, the VPC is typically constructed out of 304 stainless steel. Booth 550 — Filtra-Systems, Farmington Hills, Mich.
Offsite manufacturer offers engineering services
With capabilities for offsite filter and bulk-media tank manufacturing, this company produces vessels up to 10 ft. dia. with pressure ratings of up to 2,500 psi. Offsite manufacturing capabilities include plant management, engineering services and complete production facilities. Booth 1802 — Rosedale Products, Inc., Ann Arbor, Mich.
Chain actuator accommodates hard-to-reach valves
This company is presenting the Aluminum Pocketwheel, the newest addition to its line of manual actuators. With the Pocketwheel, users can operate valves in out-of-reach locations from the floor by pulling on a welded chain. This unit is designed to accommodate applications where a welded stainless-steel chain is required. Booth 1140 — Babbitt Steam Specialty Co., New Bedford, Mass.
Gain control of your weighing and dispensing operations
The Dispense Master computerized dispensing system allows human operators and robot weigh stations to weigh out ingredients in manufacturing orders quickly and accurately. It makes sure that standard operating procedures are followed exactly, and aids regulatory and ISO 9000 compliance. Booth 1637 — Valdata Systems USA, Fairfield, N.J.
Go green with this bio-based parts cleaner
The Bio-Circle (photo), a new parts cleaning system, utilizes bioremediation to break down oil and grease into carbon dioxide and water. This process strips the oil and grease from parts, encapsulates them and breaks them down using ATCC Class 1 microorganisms. This safe and efficient cleaning system is pH-neutral, non-flammable, solvent-free, biodegradable and non-toxic. The basin of the Bio-Circle can hold up to 440 lb of parts and has a multi-jet brush for cleaning. This unit features automatic controls for easy operation. Booth 1159 — Walter Surface Technologies, Windsor, Conn.
Meet a specialist in all aspects of Nutsche pressure filtration
This company specializes in Nutsche pressurized-filtration technology, which provides efficient and reliable filtration, washing and drying. Designing and building Nutsche fluid filtration systems with height adjustable, reversible agitators, this firm provides equipment to a range of industries, from antibiotics separation to precious metal recovery. Booth 1441 — Steri Technologies, Bohemia, N.Y.
Handle corrosive fumes and liquids with a fluoropolymer-lined ducting system
Designed to meet standards set by building and fire codes, PermaShield Pipe offers design solutions for any-size corrosive fume project. The PermaShield Pipe comes in sizes of 2 to 120 in. and is offered with a full system of fittings, dampers and accessories. The strength of stainless steel and the corrosion resistance of a fluoropolymer barrier coating make the PermaShield Pipe ideal for safely handling highly corrosive and toxic fumes and fluids. Booth 1156 — Fab-Tech, Inc., Colchester, Vt.
Specify a customized filter with this online service
This company offers the new FilterCreator system, an open online service that allows customers to easily select, size, specify and price filters for a separation process. FilterCreator provides users with a comprehensive quotation as well as detailed technical specifications and drawings. This system is used for the configuration of Hoesch filter presses, Pannevis horizontal vacuum belt filters, Larox automatic pressure filters, Scheibler polishing filters, and disc filters. Booth 1231 — Larox, Inc., Lappeenranta, Finland
Elastomer seals are supplied in O-rings or custom shapes
Designed for demanding sealing applications, Kalrez elastomer seals are supplied in standard O-rings or custom shapes. The material is resistant to most chemicals while offering high-temperature stability up to 327°C. Kalrez parts provide reliable, longterm service in aggressive environments such as chemical processing, petroleum applications, semiconductor manufacture, pharmaceuticals, and aerospace. Production facilities for Kalrez are ISO 9000 and AS 9100 registered. Booth 1519 — DuPont Performance Elastomers, Wilmington, Del.
A one-stop shop for dismantling, salvage and used equipment
This full-service, nationwide contractor provides services in demolition, plant stripouts, scrap metals recycling, equipment salvage, environmental remediation, industrial cleaning and high structure removal. The wide range of services allows customers to simplify their contracting needs and reduce costs. Booth 1041 — Frontier Industrial Corp., Tonawanda, N.Y.
Quickly identify alloy composition
The new Niton XL3 Series is the third generation of Niton handheld X-ray fluorescence (XRF) analyzers. The XL3 Series provides fast identification of metal alloys in the field, plus laboratory-quality composition analysis. A typical analysis time for routine positive-grade identification is less than two seconds. Positive material identification programs allow increased productivity and powerful documentation and reporting tools. Because the XL3 Series provides fast verification and is nondestructive, it is ideal for final quality control. Booth 1336 — Thermo Fisher Scientific, Waltham, Mass.
Monitor chemical inventory levels using this website
This Web-based solution helps chemical manufacturers optimize the inventory management of their customers’ facilities. AlarmAgent.com monitors chemical inventory levels at a particular site and sends notification when a low level is reached, allowing chemical manufacturers to know when to issue the next delivery or sales call. Levels can be quickly accessed at any time through the website, and manufacturers can maximize the number of chemicals delivered per delivery cycle, thus reducing overall costs. Booth 1164 — RACO Manufacturing & Engineering Co., Emeryville, Calif.
FEP heat exchangers are now even more durable
Slimline heat exchangers are used in the CPI for their fluoropolymer construction, which resists corrosion and combats fouling. The new Slimline Q-Series heat exchangers are made from a resin that provides improved durability and increased temperature and pressure capabilities. The Q-Series coils are suitable for steam heating applications and are available in FEP or Q-Series tubes. Tubing is offered in lengths from 4 to 16 ft, in either U-shape or straight configurations. Booth 643 — Ametek Fluoropolymer Products, Newark, Del.
Valves for low-pressure relief or vacuum breaking
This company is exhibiting its inline spring-loaded non-return valves, which are engineered for silent operation by closing quickly and smoothly to eliminate hammer noise. These versatile valves function in either a vertical or horizontal position, and can be used as low-pressure relief valves and vacuum breakers. Offered with metal-to-metal seats or soft seats, these valves come in sizes from 1/8–in. NPT to 20–in. flanged connections, with pressure ratings ranging from full vacuum to 10,000 psi. Booth 735 — Check-All Valve, Des Moines, Ill.
Mechanical seals get a diamond coating
DiamondFaces is the latest development in sealing technology from leading mechanical seal manufacturer EagleBurgmann. As the name suggests, DiamondFaces is a crystalline diamond coating for seal faces that provides maximum process reliability, vastly extended service life and improved return on investment. The use of diamond provides excellent chemical resistance and low friction, with optimal adhesion to the substrate. The new technology is suitable for a wide variety of applications in the chemical process industries, the company says. Booth 438 — EagleBurgmann, Houston, Tex.
Proven simulation software gets an upgrade
Chemstations has announced the latest release of its Chemcad suite of simulation software: version 6.0. The latest version builds on the company’s commitment to innovation, integration, and open architecture with significant improvements in both the graphical user interface and the core engineering functionality of the program. Over 1,000 organizations worldwide have chosen Chemcad. Booth 1629 — Chemstations, Houston, Tex.
MBR modules for water treatment
This new membrane bioreactor (MBR) module is self-supporting, easy to clean, and offers large surface areas. Developed specifically for wastewater treatment, the BIO-CEL module is submerged directly in the activated sludge, and the treated wastewater is drawn from the inside by vacuum. The BIO-CEL module combines the advantages of classic hollow-fiber and flat-sheet submerged modules. The self-supporting membrane sheets, just 2 mm thick, are densely packed and light in weight. The parallel arrangement of the membrane sheets significantly reduces laminar flow, and so helps prevent sludge from depositing on the membranes. The modules’ construction is also optimized to prevent the braiding of hair and fibers. Booth 431 — Microdyn-Nadir, Wiesbaden, Germany
Outsource manufacturing and engineering to India
These two Indian companies offer skilled manufacturing and engineering at competitive rates. With annual sales of $20 million, Milindia manufactures machinery for the soap and detergent industry, in which the company claims to be the market leader in India. At two facilities near New Delhi, a skilled workforce manufactures equipment of high quality. The company guarantees respect for intellectual property rights.
With experience of more than 300 process plants, Pangeaneering offers detailed engineering services for plants of up to around 1,000 pipe runs or 100 instrument loops. Starting with a basic engineering package from the process licensor, Pangeaneering produces detailed mechanical, electrical and instrumentation documents. Modern communications systems allow the company to operate as a seamless extension of its clients. Milindia (www.milindia.com), Delhi, India; Pangeaneering (www.pan geaneering.com), Noida, India