Latest News: Products
Swing check valves for fluegas desulfurization
The maintenance-free RSK swing check valves (photo) offer a high functional reliability because a tight shut-off is ensured by a rubber-lined valve disc without rotating parts and without extensions through the body wall. Because all wetted parts are rubber-lined, they…
This silencer helps protect workers from gas process noise
The Fisher WhisperTube Modal Attenuator (photo) was introduced recently for noisy gas or vapor applications. The modal attenuator is a full-bore device offering 15-dB sound suppression to reduce noise inside pipes produced by sources upstream, such as control valves, pressure-relief…
This heat exchanger provides 330°F air for drying process
The custom designed three-stage heat exchanger (photo) will be used to increase temperature of a 25,000 std. ft3/min airflow from 50°F to 330°F using 145 psig steam. Each stage is nearly 7 ft tall and 8 ft wide. Heated air…
These bolt washers are also tension sensors
This company has introduced a range of ultra-low profile bolt-load washers that is ideal for bolt-load and tensioner tool calibration. Called TensionDisc (photo), the washers are specially designed load sensors that monitor bolt loads in bolted joint assemblies. A simple…
Condition monitoring for optimizing drive systems
Condition monitoring for predictive maintenance (photo) is a drive solution that focuses on status-oriented maintenance rather than traditional time-based maintenance. Status and drive data are recorded periodically or continuously via the programmable logic controller (PLC) output parameters and can be…
A pair of evaporators for well plates
The TurboVap 96 Dual (photo) is a second-generation well plate evaporator system with two separate, and independently controlled evaporation compartments. The TurboVap 96 Dual has been designed to support enhanced well-plate evaporation within the sample-preparation workflow. With its unique two-in-one…
A compact controller with integrated I/Os
The Compact Controller 100 (photo) is a small controller with integrated input/outputs (I/Os) that is suited for smaller automation solutions. Thanks to its design as a DIN-rail built-in installation device according to DIN 43880, the new controller can also be…
Introducing a large mill-discharge slurry pump
The MDM900 mill-discharge slurry pump (photo) is the latest addition to this company’s flagship Mill Discharge (MD) Pump Series. The MDM900 is designed for heavy-duty use in concentrator plants, where capacity and wear-resistance are essential. The MDM900 is an all-metal,…
Modular plug connectors for use in hazardous areas
This company has launched a new generation of plug connectors with the Ex e and Ex d types of protection for quick connection of explosion-protected electrical equipment. As a solution that is particularly easy to mount and maintain, the modularly…
Ultra-high shear mixer for sanitary applications
The Model HSM-409XSHD-125 (photo) is a clean-in-place (CIP)-capable sanitary mixer featuring a type 316 stainless-steel mixing chamber, a 150-psig jacket for cooling and heating up to 250°F, and an X-5 Series 9-in. dia. AL6XN stainless-steel rotor/stator that operates up to…