New magnetic level indicator completes series A wide range of options have been added to the BM26 Series of magnetic level indicators (MLI) since it was first introduced in 1955. With the recent introduction of the new BM26A-8000, the company…
A process to produce an alternative to palm oil for food applications, developed by scientists at Nanyang Technological University, Singapore (NTU Singapore; www.ntu.edu.sg), will be scaled up for commercial production through a partnership with Eves Energy Pte. Ltd. (Singapore; www.eves-energy.com).…
Within rubber production facilities, density is an important process parameter that correlates with the degree of cross-linking or the hardness of the elastomer used. The determination of the density is therefore of great importance for the development of recipes and…
A practical overview on how to use location factors, and some tips on when to use — or not use — them Often in the early stages of project development in the chemical process industries (CPI), the development team is…
Editor's note: The content in the following column is adapted from the following article: Palluzi, R., Leak Prevention in Small-bore Piping and Tubing, Chem. Eng., October 2020, pp. 22–25. The original article can be found here. Leakage can negatively affect…
The Mobile Minor MM 100 spray dryer (photo) is equipped with the Cyclone CEE mechanical powder separator. This cyclone helps operators overcome challenges in spray drying, such as smearing due to powder settling in the cyclone, as well as abrasion…
Achieving regulatory compliance is often viewed as overly complicated or restrictive, but a good understanding of the current regulatory landscape can help fuel business growth and efficiency When talking about modern manufacturing, few sectors experience as much regulatory scrutiny as…
A new plasma-based technology is being touted as a more sustainable method for textile finishing, including water-intensive dyeing and coating processes. The Ausora process, developed by Xefco Pty. Ltd. (Eveleigh, Australia; www.xefco.com), in partnership with the Recycling and Clean Energy…
Selecting an effective system for controlling air pollution can help to achieve balance between environmental stewardship and industrial productivity Air pollution is an ongoing worldwide concern that impacts people and ecosystems across the globe. The emission of pollutants like particulate…
Metal components made with laser powder-bed fusion — an important additive manufacturing process — must be qualified for use in critical applications, but the qualification relies on expensive non-destructive evaluation (NDE) techniques. In-process monitoring offers a less expensive alternative, but…