Latest News: Products
A new decanter for smaller- scale sludge dewatering
The C2E decanter centrifuge (photo) was developed specifically for the dewatering and thickening of smaller sludge burdens. The machine consists of a bowl of duplex steel, with all product-wetted components made of rust- and acid-resistant 1.4404 (316) stainless steel, providing…
This compact I/O system now has M12 connections
This company has expanded its product line of extremely compact Simatic ET 200AL IO (input-output) systems to include modules with the M12 connection system (photo), higher output currents and longer maximum distances between modules. Analog and digital actuators and sensors,…
Focus on mixers and blenders
This rotary jet mixer is both compact and efficient The Rotary Jet Mixer (photo) is equipped with two or four rotary- jet nozzles. When it is positioned below the liquid level in a tank, liquid is withdrawn from the tank…
Introducing the first hybrid safety-standard I/O module
The TBPN safety block I/O module (photo) is said to be the first module to combine both standard and safety inputs and outputs in a single device. The IP67 hybrid modules can be adapted flexibly to the specific signal requirement…
A handheld VOC meter for indoor air-quality maintenance
The HHAQ-107 meter (photo) makes general measurements of mixed-gas volatile-organic-compound (VOC) levels as part of an indoor air quality (IAQ) maintenance program. The HHAQ-107’s metal-oxide semi-conductor sensor can detect ammonia, toluene, ethanol, hydrogen sulfide (H2S) and cigarette smoke. Features of…
Avoid pelletization with this twin screw extruder
The ZSE-27 MAXX “direct-to-sheet” system (photo) facilitates rapid inline compounding and production of prototype sheet samples. Benefits of direct-sheet extrusion include the product having one less heat and shear history, and the economic savings inherent with bypassing the pelletization step.…
HDPE thread protectors that can be easily installed and removed
The thread-protecting SSR Series standard sucker-rod cap (photo) is designed to withstand impact and prevent cracking. Constructed of a strong, high-density polyethylene (HDPE) material to protect the threaded ends of steel sucker rods, the wide internal ribs of the cap…
Inhibit corrosion with this new vinyl-ester-resin system
Flowchem is a new range of seamless, elastomer-modified vinyl-ester-resin systems that act as a barrier to inhibit the contact between chemical compounds or corrosive materials. Flowchem systems provide temperature resistance of up to 350°F, and exhibit high bond strength, abrasion…
This modular steam-trapping station reduces leakage
The STS17.2 steam-trapping station is a complete assembly comprised of an isolation valve, a steam-trap connector with a strainer and a check valve. The station’s modular body eliminates nearly all potential leak paths caused by multiple screwed connections that conventional…
Use this high-precision amplifier in tough production areas
The DMP41 digital precision measuring instrument features an accuracy class of 0.0005 (5 ppm), and is said to be the world’s most precise amplifier for strain-gauge-based sensor measurements. Unlike other high-precision instruments that are limited for use only in controlled…