Latest News: Products
A handheld VOC meter for indoor air-quality maintenance
The HHAQ-107 meter (photo) makes general measurements of mixed-gas volatile-organic-compound (VOC) levels as part of an indoor air quality (IAQ) maintenance program. The HHAQ-107’s metal-oxide semi-conductor sensor can detect ammonia, toluene, ethanol, hydrogen sulfide (H2S) and cigarette smoke. Features of…
Avoid pelletization with this twin screw extruder
The ZSE-27 MAXX “direct-to-sheet” system (photo) facilitates rapid inline compounding and production of prototype sheet samples. Benefits of direct-sheet extrusion include the product having one less heat and shear history, and the economic savings inherent with bypassing the pelletization step.…
HDPE thread protectors that can be easily installed and removed
The thread-protecting SSR Series standard sucker-rod cap (photo) is designed to withstand impact and prevent cracking. Constructed of a strong, high-density polyethylene (HDPE) material to protect the threaded ends of steel sucker rods, the wide internal ribs of the cap…
Inhibit corrosion with this new vinyl-ester-resin system
Flowchem is a new range of seamless, elastomer-modified vinyl-ester-resin systems that act as a barrier to inhibit the contact between chemical compounds or corrosive materials. Flowchem systems provide temperature resistance of up to 350°F, and exhibit high bond strength, abrasion…
Screen microbial strains with this micro-scale bioreactor system
The new ambr 15 fermentation system (photo) is an automated micro-bioreactor system designed to enhance microbial-strain screening with advanced capabilities supporting fed-batch microbial cultures. The new system has been specifically designed to meet the requirements of microbial fermentation. It comprises…
Continuously monitor remote water facilities
The SAT4D system (photo) provides instant notification of changes in tank levels and pump malfunctions in remote or unattended water or wastewater facilities. This satellite-based monitoring system delivers immediate alerts of changes in conditions at pumps, wells and storage facilities…
Computation rheology is added to this simulation software
With its late-October release, STAR-CCM+ v10.06 engineering simulation software features the introduction of Computational Rheology, a new engineering discipline in STAR-CCM+, helping engineers to quickly realize improved designs. Computational Rheology further expands the multidisciplinary scope of STAR-CCM+ and targets problems…
A new line of vacuum gages is introduced
The new CenterLine series of analog vacuum gages (photo) are equipped with either an 8-pin FCC connector or a 15-pin D-sub connector. These connectors are widely used, which makes their integration into existing systems simple. Users can choose between a…
Realtime alarm verification for speed-monitoring systems
The SpeedMaster with Pulse Pilot (photo) is a device that provides independent, realtime verification of an entire speed-monitoring system to ensure that alarms and shutdowns are working as expected. The SpeedMaster operates in two modes: input mode provides the device…
This aerator eliminates carryover contaminants
The Kinetic Turbo Aerator provides aeration for industries that require high-quality air processing, such as wastewater treatment, food and beverage, pharmaceutical and chemical processing. The Kinetic Turbo Aerator uses a single shaft coupling the impeller and direct-drive high-speed permanent magnet…