Latest News: Products
A robust flowmeter designed for superheated steam
The Optisonic 8300 is a two-beam ultrasonic flowmeter for superheated steam that is capable of handling high flowrates with 1% measuring accuracy. Built for longterm use, the flowmeter has no exposed cables or sensitive elements, and features a full-bore flow…
This membrane bioreactor requires less air
The Pulsion MBR membrane bioreactor pulses a large bubble through a chambered fiber bundle, creating anefficient pumping action that results in lower air and aeration energy requirements than traditional air-scour methods, says the manufacturer. Improved recirculation within the membrane module…
This modular steam-trapping station reduces leakage
The STS17.2 steam-trapping station is a complete assembly comprised of an isolation valve, a steam-trap connector with a strainer and a check valve. The station’s modular body eliminates nearly all potential leak paths caused by multiple screwed connections that conventional…
Use this high-precision amplifier in tough production areas
The DMP41 digital precision measuring instrument features an accuracy class of 0.0005 (5 ppm), and is said to be the world’s most precise amplifier for strain-gauge-based sensor measurements. Unlike other high-precision instruments that are limited for use only in controlled…
A handheld anemometer with environmental readings
The Omega HHF-312 anemometer measures ambient temperature, humidity, barometric pressure, wind speed and direction all in one multi-functional, lightweight, handheld meter. The HHF-312 calculates windchill index, as well as dewpoint and wet-bulb temperatures, and features a backlit LCD with dual…
Use this valve in high-pressure calibrations
This company’s new Trunnion-style block-and-bleed ball valve is intended for calibration applications up to 15,000 psi. This full-port, quarter-turn double ball valve is designed to provide double positive isolation, and is appropriate for high-pressure hydraulic and pneumatic systems used for…
These new, miniature AODPs are ATEX certified
Both the Model MID and CU15 miniature air-operated diaphragm pumps (AODPs) are ATEX certified for potentially explosive atmospheres, making them suitable for environmental and process-emissions monitoring. The standard version of both pumps is ATEX classified II for Zone 2, and…
Wet-well analysis for CH4, O2 and H2S gases
This company’s Wet Well Monitoring System (photo) is designed for monitoring methane, oxygen and hydrogen sulfide in a hazardous wastewater-treatment-plant environment. The system incorporates the CP-60 controller with three remote 4–20-mA (24 V d.c.) sensor/transmitters in Explosion-proof Class I Div.…
These process-control systems conform to safety standards
SysCon control systems (photo) can be custom-designed for virtually any industrial process, including mixing, pumping, chemical dosing, dilution, heat exchange, separation, drying and waste treatment. Based on process-logic control schemes, these systems are routinely supplied with a recipe-sequencing program, calibration…
A precise piston pump with minimal energy expenditure
The new piston diaphragm pumps of the model series R 509.1 (photo) add to the sera dosing-pump product repertoire with eccentric screw adjusters. The operating range of the new 509.1 piston diaphragm pumps varies from 6.5 to 81 L/h at…