Latest News: Products
A material handling system for additive manufacturing
The Additive Manufacturing Material Handling System (photo) is designed specifically to enhance additive manufacturing (3-D printing) technology when handling metal powders or toxic materials. The system consists of three elements to recover any unused material, screen it and finally return…
Onboard microprocessing for custom-configured controllers
The MGC Series (photo) is a new microprocessor-based, fully regenerative SCR (silicon-controlled rectifier) control. An onboard microprocessor allows the MCG to be preconfigured for a user’s specific application. Furthermore, users can select various modes of operation out of the box,…
Focus on Heating and Cooling Systems
Guard against gasket wear in plate heat exchangers Gaskets used in plate heat exchangers (photo) wear over time, due to natural aging, and the effect of temperature, pressure and stress that results from natural operating conditions. Getting the best performance…
PFA resins with numerous processing options
Fluon perfluoroalkoxy (PFA) resins can be used over a wide range of temperatures (–200 to 260°C) and exhibit resistance to heat, chemicals, weather and aging. With an oxygen index of 95% or better, the noncombustible resins’ dielectric properties and nonstick…
This pressure gage covers an extreme pressure range
The CPG1500 precision digital pressure gage (photo) can measure pressures up to 10,000 bars. Furthermore, a new smartphone app is available for the CPG1500. The high-pressure version of the digital pressure gage works with an accuracy of 0.5% full scale.…
Store laboratory acids safely with these cabinets
The Acid Storage Cabinet (photo) is specifically designed for the storage of corrosive chemicals, and is available in widths of 12, 18, 24, 30, 36, 42 and 48 in. The standard size is 35-in. high and 22-in. deep. The molded…
A digital ultrasonic flow system with low noise
The new Sitrans FS230 clamp-on ultrasonic flow system (photo) is a combination of the Sitrans FST030 transmitter and Sitrans FSS200 clamp-on sensors. The Sitrans FST030 transmitter includes a digital sensor link that digitizes the signal at the earliest stage of…
Recover caustic materials with these nanofiltration systems
Causti-COR nanofiltration systems are specifically designed to recover and purify caustic for reuse in food, beverage and industrial applications. The systems can recover up to 95% of caustic from solutions used to clean process equipment in industrial applications, says the…
This new NOx analyzer has an internally cooled sensor
The accuracy of an NO gas sensor, the primary component of NOx, can be compromised when exposed to ambient temperatures above 86°F (30°C) and significantly more so above 104°F (40°C). To help prevent this temperature effect on the NO sensor,…
Dual-rate pump combines two syringe pumps in a single device
The Gemini 88 Plus dual-rate syringe pump (photo) provides two independent pumping channels linked through hardware and software, combining two individual syringe pumps into one instrument. The syringe pump can infuse simultaneously at different rates, or infuse with one syringe…