A new process for producing lithium titanate oxide (LTO) anode materials could lead to smaller batteries with ultrafast recharging. LTO offers a significantly higher surface area than graphite anode materials, which enables rapid electron transit and, ultimately, much faster recharging…
After years of testing and development, Atlas Copco Compressors LLC (Rock Hill, S.C.; www.atlascopco.us) will begin production of a new air-dryer technology by the end of this year. Unlike conventional drying systems, the MDG rotary drum dryer guarantees a stable…
Trash bags Barrier films used in food packaging are difficult to recycle effectively, because they often contain multiple polymers that are not compatible with one another in the mixing steps required for the recycling process. Now, trash bags made from…
For petroleum refineries, the cost of converting hydrofluoric-acid-based alkylation units to the relatively safer sulfuric-acid-based alkylation process (diagram) has been cost-prohibitive and has lacked specific economic benefits. Now, DuPont (Wilmington, Del.; www.dupont.com) has developed a low-cost approach to converting existing…
Microbes inhabiting the extreme environments thousands of feet below the earth’s surface possess unique properties not encountered elsewhere. A research consortium of South Dakota School of Mines and Technology (SDSMT; Rapid City; www.sdsmt.edu), University of Oklahoma (Norman) and Montana State…
Chemists and engineers from the Performance Materials Segment of Evonik Industries AG (Essen, Germany; www.evonik.com) have developed a new process for making methyl methacrylate (MMA). With a yield of over 90%, the so-called Leading in Methacrylates (LiMA) process can be…
Both physical security and cybersecurity must be in place to keep chemical facilities safe from attack While almost all businesses in today’s world are concerned with security — both physical security and cybersecurity — chemical processors likely have a deeper…
A triple-layer, porous membrane system developed at the Functional Materials Laboratory at Eidgenössische Technische Hochschule Zürich (www.fml.ethz.ch) can be fashioned into evaporative curtains to cool and humidify indoor spaces, potentially decreasing the energy demand for climate-control systems. Juxtaposing opposite forces…
Advances in next-generation materials and assembly techniques have enhanced membranes’ effectiveness in numerous applications Membranes are one of the primary technologies used for separations. While they may be best known for their use in water-treatment operations, advances in membrane technologies…
NTT Communications Corp. (NTT Com; www.ntt.com) and Mitsui Chemicals Inc. (both Tokyo, Japan; www.mitsuichem.com) have demonstrated the ability to predict, with a high precision, the concentration of gaseous products generated in a furnace. The predictions are produced in just 20…