The Series FBV-3-Press, two-piece, full port, brass ball valves are designed for use in this firm’s ProPress piping systems. Its integral press fitting tailpieces are designed to be quickly and easily pressed into ProPress piping systems and are rated at…
This vendor’s line of electrically-powered compressors delivers from 200 to 1,500 cfm at pressures up to 150 psi, producing clean, oil-free air suitable for high-purity applications. The units are also designed with sensitive environmental considerations in mind, with a sound-attenuating…
This process pump is engineered to deliver the highest flowrate of any electrically operated diaphragm pump. These pumps offer oil-free operation without risk of medium contamination and can be equipped with a double diaphragm system for increased safety critical when…
For safe operation of a flange joint, it is important to consider a number of parameters that have an impact on the bolts, gasket and flanges. The relatively large number of mathematical operations and the need for managing a large…
The Profiler (photo) works by giving a density profile of the cross section of a vessel and then a visual interpretation of the data in much the same way an MRI scanner would provide a slice of a human body.…
VMY ’56 is the official designation of the new generation of this firm’s refrigeration and process-gas compressors (photo). It is the synthesis of 35 years of experience with former VMY series and will replace the well-known series VMY ’46 in…
The 8262/8263 Series two-way direct acting solenoid valves are now available with increased pressure ratings and realtime online configuration and ordering. The valves come in normally-closed, brass and stainless-steel constructions. They can be used to control the flow of air,…
“Quick Advance” (QA) sampling valves offer “ease of use” in collecting truly representative samples. The QA valves employ a rack and gear combination that provides a full piston motion while the handle only travels one-third of a turn. Valve design…
Pump Engineering Recently launched by 3M Pumps and now available from this firm, the T MAG-M pump (photo) is a horizontal, sealless peripheral pump with a permanent-magnet drive system and no mechanical seals. Features include a high-power, synchronous magnetic coupling,…
GEMÜ This firm has introduced a new motorized open/close actuator for globe and diaphragm valves. The 24-V d.c. actuator (photo) is an alternative to current designs and also to solenoid valves. Valves using this actuator are especially suited to applications…