Electro-Chemical Devices The model CSX2 conductivity sensor (photo) is designed for temperatures up to 200ËšC at pressures of 250 psig. For temperatures below 100ËšC, the CSX2 is rated for pressures of up to 400 psig. The CSX2 is a two-electrode…
This firm has enhanced its metsoDNA Turbine Control by integrating in fast turbine control and other features to improve its cost efficiency and ease of maintenance. The fast, redundant control handles control cycles down to 5 ms for any size…
This intrinsically safe (IS) calibrator is designed to be incapable of causing ignition in a surrounding environment, which may have flammable gases, mists, vapors or combustible dust present. The new ATEX and IECEx certified MC2-IS Multifunction Calibrator (photo) is designed…
The SOLA Flare is a total sulfur analyzer system intended to provide a realtime response, remotely via the internet, to sudden shifts in the composition of a flare-gas feedstream — as well as a solution for potential sample condensation. Its…
The Lancom 200 was developed specifically for oil- and coal-fired boiler systems that require periodic monitoring of the sulfuric acid dewpoint temperature to maintain boiler efficiency, prevent corrosion or to evaluate the effectiveness of fuel additives and changes in combustion…
The G450 Multi-gas Detector (photo) is said to offer exceptional confined space performance. The compact units incorporate one to four sensors, and have interchangeable battery packs for up to 25 hours continuous operation. The highly water-resistant housing has IP 67…
The Atlas Calorimetry System has been recently introduced for performing heat-flow and power-compensatory calorimetry measurements. The system can generate power and enthalpy graphs at the click of a button. This, combined with the simple configuration of reaction temperatures, dosing quantities…
This alarm thermometer can be used to ensure that temperature-sensitive chemicals stored in both refrigerators and freezers do not deteriorate. Featuring tamper-resistant audible and visual alarms, the instrument comes in a two-probe model (MM125; photo) that can monitor both refrigerators…
The LM80 laser transmitter (photo) can be used for noncontact level measurement and positioning in dry bulk and liquid level applications. Solid surfaces can be measured at any angle with the LM80, as well as moving targets, such as overhead…
Realtime monitoring of the oxygen concentration in waste gas plays a key role in explosion prevention. Using amphoteric O2 electrodes, there is no need for complex and costly sample handling methods. In contrast to these alternative analytical methods, this firm’s…